Posts Tagged: ‘Twin’

Auger Curbing Equipments

July 24, 2011 Posted by admin

Twin auger rotating concrete curbing machine is one the most widely used auger curbing equipments. This technology is patented by the Curb-King who are the oldest and one of the most reputed names in curbing equipment manufacturers.

Twin auger rotating concrete curbing machine

Twin auger rotating concrete curbing machine operates on twin counter rotating augers which work together and provide the positive, and constant pressure required to propel the machine forward. The Curbing structure is equipped with Dyna-Form drive system for efficient curb forming. Along with the prior the vibrating augers, hopper and the housing convert the relatively dry material fluid from hopper to slip form. The machine has a self-feeding mechanism.

Features
1. Fast: The self-feeding hopper and the twin augers make the machine efficient laying upto twelve feet per minute. The machine can perform relentlessly and at a constant rate with same efficiency.
2. Labor Saving: Since the machine can easily climb as much as 4 to 5 inches, it doesn’t needs a perfect ground preparation, thus saves labor.
3. Swing Mounted Leveling Jacks: The swing arms mounted on the leveling jack allow you to fix one wheel in the trench and the other on to the side. The former controls the steering, depth, and level of the curb, providing you a even and level laid curb. The wheel on the side is called the catering wheel, which controls the side-to-side level. This wheel can easily be adjusted over rough terrain without changing the depth or level of the curb.
4. Flexibility: The straight upside and swing arms of the machine provides with great flexibility while maneuvering around obstacles. You can move the structure close to any wall, shrubs or tree. The reversible slipforms enables you to start from either end as well.
5. Compact Design: The machine weighs not more than 150 lbs with an overall length is 36 inches. In addition as being electric or gas powered the machine is very suitable for lawns and garden.

If your planning to make it big in the concrete curbing business Twin auger rotating concrete curbing machine will greatly help you with efficient and economic operation and will lead you ahead of your competitors with better profitability.

Twin tank metered water softener with 1 Fleck

May 12, 2011 Posted by admin

CAI Technologies
$1255.00
$1365.00

24,000 grain microprocessor based metered twin water softener. The SXT9000HC uses a Fleck high flow capacity 1 inch (1.0 connections standard) valve with an advanced microprocessor based metered control and Noryl valve designed for residential use! The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The SXT valve delivers a higher flow rate for larger residential applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. This softener regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. No by-pass valve is available with a 1 inch 9100 valve - a by-pass system can be plumbed in separately. ....read more

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 3/4 Fleck

May 7, 2011 Posted by admin

CAI Technologies
$1255.00
$1365.00

32,000 grain microprocessor based metered twin water softener with an advanced microprocessor based interface and metered control (3/4 connections standard). The new SXT-9100 has a Noryl valve body designed for residential use! The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The 9100SXT valve uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. A system by-pass valve is included along with the purchase of this unit. ....read more

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 3/4 Fleck

May 4, 2011 Posted by admin

CAI Technologies
$1455.00
$1465.00

48,000 grain microprocessor based metered twin water softener with an advanced microprocessor based interface and metered control (3/4 connections standard). The new SXT-9100 has a Noryl valve body designed for residential use! The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The 9100SXT valve uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. A system by-pass valve is included along with the purchase of this unit. ....read more

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 1 Fleck

May 2, 2011 Posted by admin

CAI Technologies
$1580.00
$1690.00

48,000 grain microprocessor based metered twin water softener. The SXT9000HC uses a Fleck high flow capacity 1 inch (1.0 connections standard) valve with an advanced microprocessor based metered control and brass valve body. The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The SXT valve delivers a higher flow rate for larger residential applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT9000HC regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. No by-pass valve is available with a 1 inch 9000 control valve - a by-pass system can be plumbed in separately. ....read more

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 3/4 Fleck

May 2, 2011 Posted by admin

CAI Technologies
$1389.00
$1605.00

64,000 grain microprocessor based metered twin water softener with an advanced microprocessor based interface and metered control (3/4 connections standard). The new SXT-9100 has a Noryl valve body designed for residential use! The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The 9100SXT valve uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. A system by-pass valve is included along with the purchase of this unit. ....read more

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 3/4 Fleck

April 28, 2011 Posted by admin

CAI Technologies
$1280.00
$1390.00

24,000 grain microprocessor based metered twin water softener. The SXT system uses an advanced microprocessor based interface and metered control (3/4 connections standard) with a brass valve body. The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The 9000SXT valve delivers a higher flow rate for larger residential applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. A system by-pass valve is included along with the purchase of this unit. ....read more

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 0.75 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 48,000 grain total system capacity
  • High flow 1.05 distributors with 3/4 by-pass valve
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 1 Fleck

April 25, 2011 Posted by admin

CAI Technologies
$1415.00
$1512.00

32,000 grain electro-mechanical based metered twin water softener. The ECTHC uses a Fleck high flow capacity 1 inch mechanical metered twin Econominder control (1.0 connections standard), with a brass valve body. The twin Econominder delivers a higher flow rate for larger residential and light commercial applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener uses a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The ECTHC regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. No by-pass valve is available with a 1 inch 9000 valve - a by-pass system can be plumbed in separately. ....read more

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 64,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 1 Fleck

April 16, 2011 Posted by admin

CAI Technologies
$1515.00
$1625.00

48,000 grain electro-mechanical based metered twin water softener. The ECTHC uses a Fleck high flow capacity 1 inch mechanical metered twin Econominder control (1.0 connections standard), with a brass valve body. The twin Econominder delivers a higher flow rate for larger residential and light commercial applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener uses a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The ECTHC regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. No by-pass valve is available with a 1 inch 9000 valve - a by-pass system can be plumbed in separately. ....read more

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 1.5 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 96,000 grain total system capacity
  • High flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

Twin tank metered water softener with 1 Fleck

April 5, 2011 Posted by admin

CAI Technologies
$1499.00
$1830.00

64,000 grain microprocessor based metered twin water softener. The SXT9000HC uses a Fleck high flow capacity 1 inch (1.0 connections standard) valve with an advanced microprocessor based metered control and brass valve body. The SXT control allows for easy programming and is packed with features like calendar override, soft water remaining, time of day, service and diagnostic indications, and more! The SXT valve delivers a higher flow rate for larger residential applications and uses an up-flow backwash for a very efficient cleaning of the softener resin bed. This softener has a twin tank duplex design with two separate resin tanks and single brine tank. A twin tank system operates at maximum efficiency, using 100% of the resin of the tank in service before switching to the second tank, for continuous supply of soft water with no regeneration downtime. The SXT9000HC regenerates with soft water and uses a soft water pre-rinse which flushes the resin of hardness and stagnant water before a new tank comes on line. The system stays clean, for optimum operating efficiency and minimum maintenance. Beige colored resin tanks, manufactured by Structural, are poly lined and fiberglass reinforced. No by-pass valve is available with a 1 inch 9000 control valve - a by-pass system can be plumbed in separately. ....read more

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High Flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High Flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US

  • 2 ft3 Ionac C-249 ion exchange resin per tank
  • Twin tank 128,000 grain total system capacity
  • High Flow 1.05 distributors
  • 18 diameter x 33 brine tank with grid and float assembly
  • Flat $30 shipping charge within the continental US